CCNA CCNP Cisco Certification Exam Braindumps

1.Based on the network diagram shown in the exhibit, both R5 and R6 are clients of the R2 RR. When the 10.0.0.0/8 iBGP update from R3 is received by the R2 RR, which router(s) will R2 reflect the update to?
A.R1 only
B.R5 and R6
C.R5, R6 and R1
D.R4, R5 and R6
E.R4, R5, R6 and R1
F.to no other router
Correct:C

2.Based on this configuration, which two peering router neighbor statements are correct? (Choose two.)router bgp 50001 neighbor 192.168.1.1 remote-as 50001 neighbor 10.1.1.1 remote-as 50002 neighbor 10.1.1.1 local-as 50003 ! Output omitted
A.EBGP - neighbor 10.1.1.2 remote-as 50003
B.EBGP - neighbor 10.1.1.2 remote-as 50001
C.EBGP - neighbor 10.1.1.2 remote-as 50001 and neighbor 10.1.1.2 local-as 50003
D.IBGP - neighbor 192.168.1.2 remote-as 50001
E.IBGP - neighbor 192.168.1.2 remote-as 50003
F.IBGP - neighbor 192.168.1.2 remote-as 50003 and neighbor 192.168.1.2 local-as 50001
Correct:C D

3.Which two statements about a transit AS are correct? (Choose two.)
A.A transit AS has eBGP connection(s) to only one external AS.
B.Routes between Ass are always exchanged via eBGP.
C.A transit AS uses an IGP like OSPF or ISIS to propagate the external networks within the transit AS.
D.Core routers within a transit AS normally use default routing to reach the external networks.
E.iBGP sessions can be established between non directly connected routers.
Correct:B E

4.Refer to the exhibit and the following connectivity requirements. How many different VRFs are required? Sites CE1A, CE1B, CE1C, and CE1D require connectivity among them. Sites CE2A and CE2B require connectivity between them. Site CE12A requires connectivity to sites CE1A, CE1B, CE1C, CE1D, and CE12B. Site CE12B requires connectivity to sites CE2A, CE2B, and CE12A.
A.2 VRFs
B.3 VRFs
C.4 VRFs
D.6 VRFs
E.8 VRFs
F.10 VRFs
Correct:C

1.Based on the network diagram shown in the exhibit, both R5 and R6 are clients of the R2 RR. When the 10.0.0.0/8 iBGP update from R3 is received by the R2 RR, which router(s) will R2 reflect the update to?
A.R1 only
B.R5 and R6
C.R5, R6 and R1
D.R4, R5 and R6
E.R4, R5, R6 and R1
F.to no other router
Correct:C

2.Based on this configuration, which two peering router neighbor statements are correct? (Choose two.)router bgp 50001 neighbor 192.168.1.1 remote-as 50001 neighbor 10.1.1.1 remote-as 50002 neighbor 10.1.1.1 local-as 50003 ! Output omitted
A.EBGP - neighbor 10.1.1.2 remote-as 50003
B.EBGP - neighbor 10.1.1.2 remote-as 50001
C.EBGP - neighbor 10.1.1.2 remote-as 50001 and neighbor 10.1.1.2 local-as 50003
D.IBGP - neighbor 192.168.1.2 remote-as 50001
E.IBGP - neighbor 192.168.1.2 remote-as 50003
F.IBGP - neighbor 192.168.1.2 remote-as 50003 and neighbor 192.168.1.2 local-as 50001
Correct:C D

642-691:CCIP BGP + MPLS Exam (BGP + MPLS)

3.Which two statements about a transit AS are correct? (Choose two.)
A.A transit AS has eBGP connection(s) to only one external AS.
B.Routes between Ass are always exchanged via eBGP.
C.A transit AS uses an IGP like OSPF or ISIS to propagate the external networks within the transit AS.
D.Core routers within a transit AS normally use default routing to reach the external networks.
E.iBGP sessions can be established between non directly connected routers.
Correct:B E

4.Refer to the exhibit and the following connectivity requirements. How many different VRFs are required? Sites CE1A, CE1B, CE1C, and CE1D require connectivity among them. Sites CE2A and CE2B require connectivity between them. Site CE12A requires connectivity to sites CE1A, CE1B, CE1C, CE1D, and CE12B. Site CE12B requires connectivity to sites CE2A, CE2B, and CE12A.
A.2 VRFs
B.3 VRFs
C.4 VRFs
D.6 VRFs
E.8 VRFs
F.10 VRFs
Correct:C

5.Refer to the exhibit. A diagram of a router connected to an MPLS-enabled ATM switch via an LC-ATM MPLS interface, and a partial configuration for the MPLS-enabled ATM switch and router are shown. Which statement describes what is incorrect about the configuration shown?
A.CEF has not been enabled on the router.
B.The VPI range of 2-3 is invalid.
C.The control VPI/VCI has not been set to 0/32 on the router.
D.VC-merge has not been enabled on the ATM switch interface.
E.The router has not been configured to specifically use LDP.
Correct:A

High quality and Value for the 642-691 Exam.

Testpassport Practice Exams for CCIP BGP + MPLS Exam (BGP + MPLS) 642-691 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your CCIP exam and get your CCIP Certification.

We guarantee your success in the first attempt. If you do not pass the 642-691 exam (CCIP BGP + MPLS Exam (BGP + MPLS)) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free. TestPassport will help you to pass the 642-691 exam. TestPassport 642-691 contains 96 questions, multiple choice answers.

Testpassport 642-691 Downloadable.

Printable Exams (in PDF format) Our Exam 642-691 Preparation Material provides you everything you will need to take your CCIP exam. The CCIP Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get CCIP exam questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first CCIP exam try, but also save your valuable time .

1.Based on the network diagram shown in the exhibit, both R5 and R6 are clients of the R2 RR. When the 10.0.0.0/8 iBGP update from R3 is received by the R2 RR, which router(s) will R2 reflect the update to?
A.R1 only
B.R5 and R6
C.R5, R6 and R1
D.R4, R5 and R6
E.R4, R5, R6 and R1
F.to no other router
Correct:C
2.Based on this configuration, which two peering router neighbor statements are correct? (Choose two.)router bgp 50001 neighbor 192.168.1.1 remote-as 50001 neighbor 10.1.1.1 remote-as 50002 neighbor 10.1.1.1 local-as 50003 ! Output omitted
A.EBGP - neighbor 10.1.1.2 remote-as 50003
B.EBGP - neighbor 10.1.1.2 remote-as 50001
C.EBGP - neighbor 10.1.1.2 remote-as 50001 and neighbor 10.1.1.2 local-as 50003
D.IBGP - neighbor 192.168.1.2 remote-as 50001
E.IBGP - neighbor 192.168.1.2 remote-as 50003
F.IBGP - neighbor 192.168.1.2 remote-as 50003 and neighbor 192.168.1.2 local-as 50001
Correct:C D

3.Which two statements about a transit AS are correct? (Choose two.)
A.A transit AS has eBGP connection(s) to only one external AS.
B.Routes between Ass are always exchanged via eBGP.
C.A transit AS uses an IGP like OSPF or ISIS to propagate the external networks within the transit AS.
D.Core routers within a transit AS normally use default routing to reach the external networks.
E.iBGP sessions can be established between non directly connected routers.
Correct:B E